Question

Please let me know the user name and password for connecting to the NX Witness server.

Target Device

• AG10

Answer

To access the Nx Witness server, it is necessary to install the Nx Witness desktop client.

Download the client of the version appropriate for your system from the following page and install it.

• Please tell me where to download Nx Witness

For administrators

If you start the Nx Witness desktop client, a media server within the same network will be searched first. Follow the procedure below to configure the connection settings for the media server.

*Please conduct this task by using a PC within the same network where the gateway is located. If using a network different from the one where the gateway is located, a media server will not be detected and the connection settings will not be configured for it.

1. If the media server is displayed, click the [ New Server ] tile.
   
   
2. If the following screen is displayed, click [ SETUP NEW SYSTEM ].
   
   
3. Enter the system name, and click [ Next → ].
   
   
4. Set the administrator password, and click [ Next → ].
   
   
5. If you complete configuring the settings, the system will be ready for use. Click [ Complete ].
   
   

For general users

< If you have not created an account for Nx Wittness >

1. From the [ Register ] of Network Optix, create an account for Nx witness.
2. Ask the administrator to give the right to access Nx Witness to the address registered in 1.
3. Confirm the server access information with the administrator.
4. After logging in Nx Witness, access the server.

< If you have created an account for Nx Witness >

1. Ask the administrator to give the right to access Nx Witness to you.
2. Confirm the server access information for the account of Nx Witness with the administrator.
3. After logging in Nx Witness, access the server.