Question

The mobile module information is not displayed with the show devise mobile command.

amnimo(cfg)# show device mobile
amnimo(cfg)# 

Answer

If the mobile module information is not displayed, update the SIM information to display it normally.

 Follow the procedure below to update the SIM information.

Procedure for displaying the mobile module information

1. Disable Interface ecm0.

   amnimo(cfg)# interface ecm0
   amnimo(cfg-interface-ecm0)# no enable
   amnimo(cfg-interface-ecm0)# exit

2. Execute the device mobile sim command to update the SIM information.

   amnimo(cfg)# device mobile sim

3. Enable Interface ecm0 disabled in 1.

   amnimo(cfg)# interface ecm0
   amnimo(cfg-interface-ecm0)# enable
   amnimo(cfg-interface-ecm0)# exit

4. Execute the show device mobile command to check if the mobile module information is displayed.

   amnimo(cfg)# show device mobile

If the mobile module information is not displayed even after performing the above procedure

After resetting the power supply to the mobile module, perform the above procedure again. 

• Mobile module power reset   Execution example

  amnimo# device mobile reset

Japanese Reference: ユーザーズマニュアル「7.2.2 モバイルモジュールの電源をリセットする」