Tomoko
- Total activity 820
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 424
Articles
Recent activity by Tomoko-
How to set up port forwarding
This recipe explains how to set up port forwarding to transfer specific packets that arrive at your Edge Gateway from the Internet to a device on the LAN side. By configuring the DNAT settings on y...
-
Connecting to the Internet via the Edge Gateway
In order to connect to the Internet via the Edge Gateway, you will need to configure the SNAT settings. By configuring the SNAT settings, you will be able to use the Edge Gateway like a broadband r...
-
If I restart Edge Gateway, the settings of Nx Witness will be deleted.
Question If I restart Edge Gateway, the settings I must have configured for Nx Witness (account information, camera settings, etc.) will be deleted. Even when the desktop client of Nx Witness is st...
-
Please let me know where to download Nx Witness.
Question Please let me know where to download Nx Witness. Target devices AG10 Firmware Version. 1.3.0 Answer The version and the download destination of Nx Witness are as follows. (As of Sep 2...
-
Please let me know how to add an account to Nx Witness
Question Please let me know how to add an account for viewing to Nx Witness. Target Device AG10 Answer Please check the pages about creating new users in the manual. You can open the Nx Witne...
-
Rebooting the device (CLI)
Question Please let me know how to reboot the device with the CLI. Target devices AG10/20 AR10/20 AC10 Answer There are 2 ways to reboot the device. Software reboot Hardware reboot Software reb...
-
How do I configure additional storage devices?
Question How do I configure additional storage devices for Edge Gateway? Target devices AG10/20 Answer To use additionally installed storage devices on Edge Gateway, the following needs to be per...
-
Please let me know about the operation of connection retry count.
Question Please let me know about the operation of "connection retry count" described in the "GUI User's Manual". When performing a connection retry, how may seconds after which occasion will the n...
-
How to change the boot area from U-Boot
Question How can I change the boot area from U-Boot? Target devices AG10/20 AR10/20 Answer Follow the following procedure to change the boot area. Switch the DIP switch to U-Boot command mode. ...
-
Setting the priority for multiple SIMs and connecting to them
Question If using multiple SIMs, which one will be prioritized and connected to? Also, please let me know how to configure the priority settings. Target devices AG10 AR10 Answer The connection ...